Not available 
| Notes | Notes on operation: The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Product properties | Product type: Contact insert Application: Hybrid Sensor type: Ethernet Number of positions: 8 Shielded: yes Coding: Y Thread type: M12 Insulation characteristics Overvoltage category: III Degree of pollution: 3 |
| Electrical properties | Rated surge voltage: 0.8 kV Contact resistance: ââ°¤ 3 mé Insulation resistance: > 100 Mé Nominal voltage UN: 48 V AC (Power and data) 50 V DC (Power and data) Nominal current IN: 0.5 A (Data) 6 A (Power) Transmission medium: Copper Transmission characteristics (category): CAT5 (IEC 11801:2002) |
| Connection data | Connection method: THR solder connection |
| Interfaces | Signal type/category: Ethernet CAT5 (IEC 11801:2002) |
| Dimensions | Length of the solder pin: 2.3 mm |
| Material specifications | Material: Zinc die-cast (nickel-plated) Flammability rating according to UL 94: V0 Contact material: CuZn Contact surface material: Au Contact carrier material: PPA |
| Connector | Connection 1 Head design: Socket Head cable outlet: straight Head thread type: M12 Coding: Y |
| Cable/line | Signal type/category: Ethernet CAT5 (IEC 11801:2002) |
| Mechanical properties | Mechanical data Insertion/withdrawal cycles: > 100 |
| Environmental and real-life conditions | Ambient conditions Degree of protection (when plugged in): IP67 (correctly plugged in and locked) Degree of protection: IP67 (correctly plugged in and locked) IP67, when plugged in Ambient temperature (operation): -40 °C ... 90 °C (Plug / socket) |
| Mounting | Mounting type: Rear mounting |
| Packaging specifications | Type of packaging: Blister |
Description other products
