2800907 PHOENIX CONTACT -

Product properties	Type: Male Product type: Device circuit breakers Product family: CBÃE Number of positions: 1 No. of channels: 1 Insulation characteristics Pollution degree: 2
Electrical properties	No. of channels: 1 General Operating voltage: 24 VÃDC 18 VÃDC ... 30 VÃDC Nominal current I_N: 10 A Rated surge voltage: 0.5 kV Tripping method: E (electronic) Required backup fuse: not required, integrated failsafe element Dielectric strength: max. 30 VÃDC (Load circuit) Active current limitation: typ. 1.25 x I_N Fuse: electronic Closed circuit current I₀: typ. 8 mA (When switched on) typ. 17 mA (With alarm output) Power dissipation: 1.61 W (Nominal operation) Temperature derating: 9 A (at 50Ã°C) MTBF (IEC 61709, SN 29500): 7200000 h (at 25Ã°C with 80Ã% load) 6330000 h (at 40Ã°C with 80Ã% load) Voltage drop: 120 mV (at I_N) Fail-safe element: 15 AÃDC Load circuit Shutdown time: 80 ms (see time/current characteristic curve) Undervoltage switch-off: < 14 V (typ. OFF) > 17 V (typ. ON) Max. capacitive load: 20000 ÃµF Auxiliary contact Contact connection type: floating signal contact Minimum operating voltage U_min DC: 10 VÃDC Maximum operating voltage U_max DC: 30 VÃDC Minimum operating current I_min: 10 mA Max. operating current I_max: 0.5 A
Connection data	Connection method: pluggable
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/9c754cbf8e030f4089d1985cb82bba0b/-S204x204-FJPG Width: 12.3 mm Height: 45 mm Depth: 52 mm Complete module width: 12.3 mm Complete module height: 90 mm Complete module depth: 77.3 mm
Material specifications	Flammability rating according to UL 94: V-0
Environmental and real-life conditions	Ambient conditions Degree of protection: IP30 (Actuation area) Ambient temperature (operation): -25°C ... 50°C Ambient temperature (storage/transport): -40°C ... 70°C Humidity test: 96Ãh, 95Ã%ÃRH, 40Ã°C Vibration (operation): 3g (according to IEC 60068-2-6, Test Fc)
Approvals	UL approval Identification: UL Listed ULÃ508 UL Recognized UL 2367 Shipbuilding approval Identification: DNV GL
Standards and regulations	Standard designation: EMV Standards/specifications: ENÃ61000-6-3 ENÃ61000-6-2 Note: Interference emission Noise immunity
Mounting	Mounting type: on base element