2944795 PHOENIX CONTACT -

EMG 22-REL/KSR-W230/21-21 - Relay Module

Relay module, with soldered-in miniature switching relay, contact (AgNi): medium to large loads, 2changeover contacts, input voltage 230VAC/DC

Product Code: 2944795 copia - copy

Partner cod.: 2944795 copia - copy

PHOENIX CONTACT

Notes	General: At least one functional insulation against adjacent modules is complied with in the support rail direction. If the application has higher requirements on the insulation (basic or reinforced insulation), then these must be realized through suitable measures (e.Ãg., partition plates). Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
Product properties	Product type: Relay Module Mechanical service life: 1x 10⁷ cycles, approximately
Electrical properties	Maximum power dissipation for nominal condition: 1.15 W Test voltage (Winding/contact): 2.5 kV_rms (50ÃHz, 1Ãmin., winding/contact) Test voltage (Changeover contact/changeover contact): 1 V_rms (50ÃHz, 1Ãmin., changeover contact/changeover contact) Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 VÃAC
Input data	Coil side Nominal input voltage U_N: 230 VÃAC Input voltage range: 195.5 VÃAC ... 253 VÃAC (20Ã°C) Mains frequency: 50 Hz Drive and function: monostable Drive (polarity): polarized Typical input current at U_N: 3.5 mA Typical response time: 4 ms ... 15 ms Typical release time range: 4 ms ... 15 ms Protective circuit: Varistor Status display: Glow lamp
Output data	Switching Contact switching type: 2 changeover contacts Type of switch contact: Single contact Contact material: AgNi Maximum switching voltage: 250 V AC/DC Minimum switching voltage: 5 V (10ÃmA) Limiting continuous current: 5 A Interrupting rating (ohmic load) max.: 70 W (24ÃVÃDC) 40 W (48ÃVÃDC) 35 W (60ÃVÃDC) 30 W (110ÃVÃDC) 55 W (220ÃVÃDC) 750 VA (250ÃVÃAC)
Connection data	Connection method: Screw connection
Dimensions	Width: 22.5 mm Height: 79.4 mm Depth: 60.2 mm
Environmental and real-life conditions	Ambient conditions Degree of protection (Relay): RT III (Relay) Degree of protection (Installation location): Ã¢Ã¢°¥ IP54 (Installation location) Ambient temperature (operation): -20°C ... 50°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: Ã¢Ã¢°¤ 2000 m
Standards and regulations	Standards/regulations: ENÃ50178 ENÃ61810-1 Air clearances and creepage distances between the power circuits Standards/regulations: DINÃENÃ50178
Mounting	Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any