Non disponibile 
| Notes | General: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.Ãby using cable ties. |
| Mounting | Connection method: Crimp connection |
| Product properties | Product type: Circular connector (cable-side) Sensor type: Power Number of positions: 5 Application: Power supply No. of cable outlets: 1 Shielded: yes Coding: K Cable outlet: straight Insulation characteristics Overvoltage category: III Degree of pollution: 3 |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/d6fa7d73d7de6549bfbb4bef4fb9fb7f/-S204x204-FJPG Length: 57 mm External dimensions Outside diameter: 8 mm ... 13 mm Housing Diameter housing: 21.5 mm |
| Material specifications | Flammability rating according to UL 94: V0 Material of grip body: Zinc die-cast, nickel-plated Contact carrier material: PA Material for screw connection: Zinc die-cast, tin-plated |
| Connection data | Conductor connection Connection method: Crimp connection Connection cross section: 1.5 mm² ... 2.5 mm² (flexible) Connection cross section AWG: 14 (flexible) Tightening torque: 0.6 Nm (M12 knurl) 5 Nm (Pressure nut with coupling sleeve) Pin assignment Contact | Color (signal designation) | Contact (optional): 1 = BK 2 = BK 3 = BK 4 = BK PE = GNYE |
| Electrical properties | Rated surge voltage: 6 kV Insulation resistance: ââ°¥ 100 Mé Nominal voltage UN: 690 VÃAC Nominal current IN: 16 A (when using 2.5 mm² conductors) 16 A (at 40ðC) |
| Mechanical properties | Mechanical data Insertion/withdrawal cycles: ââ°¥ 100 |
| Connector | Connection 1 Head design: Socket Head cable outlet: straight Head thread type: M12 Coding: K |
| Cable/line | Signal type/category: Power |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP65 Ambient temperature (operation): -40°C ... 85°C (Plug / socket) |
| Standards and regulations | Standard designation: M12 connector Standards/specifications: based on IEC 61076-2-111 |
Di seguito alcuni articoli correlati a quello che stai vedendo
