1035427 PHOENIX CONTACT -

AXL F DO8/2 2A XC 1H - Digital module

AxiolineF, Digital output module, Digital outputs:8, 24 VDC, 2 A, connection technology:2-conductor, Extremeconditions version, transmission speed in the local bus:100 Mbps, degree of protection: IP20, including bus base module and AxiolineF connectors

Cod. Articolo: 1035427 copia - copy

Cod. Fornitore: 1035427 copia - copy

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/172c7c5767999646b422d3edebda44f8/-S204x204-FJPG Width: 35 mm Height: 126.1 mm Depth: 54 mm Note on dimensions: The depth applies when a THÃ35-7.5 DIN rail is used (in accordance with ENÃ60715).
Interfaces	AxiolineÃFÃlocal bus Number of interfaces: 2 Connection method: Bus base module Transmission speed: 100 Mbps
System properties	Module Input address area: 0 Byte Output address area: 1 Byte Required parameter data: 1 Byte Required configuration data: 6 Byte
Output data	Digital Output name: Digital outputs Connection method: Push-in connection Connection technology: 2-conductor Number of outputs: 8 Protective circuit: Short-circuit protection, overload protection of the outputs; electronic Output voltage: 24 V Maximum output current per module: 16 A (Provide external protection; if the total current of 8ÃA is exceeded, connect the supply at the power connector parallel via both terminal points.) Nominal output voltage: 24 VÃDC Load min.: 10 kÃ© Output voltage when switched off: max. 1 V Output current when switched off: max. 300 ÃµA Nominal load, inductive: max. 48 VA (1.2 H, 12 Ã©, at nominal load) Nominal load, lamp: max. 48 W (at nominal voltage) Nominal load, ohmic: max. 48 W (12 Ã©, at nominal load) Switching frequency: max. 6000 per second (with nominal ohmic load, up to HWÃ01) max. 10000 per second (For min. 50ÃmA load current, from HWÃ02) max. 1 per second (with inductive load) max. 4 per second (with nominal lamp load) Reverse voltage resistance to short pulses: limited protection up to 0.5 A for 1 s Behavior with overload: Shutdown with automatic restart Behavior with inductive overload: Output can be destroyed Signal delay: max. 150 Ãµs (When switching on, up to HWÃ01) max. 150 Ãµs (When switching off, for min. 100ÃmA load current, up to HWÃ01) max. 100 Ãµs (When switching on, from HWÃ02) max. 100 Ãµs (When switching off, for min. 100ÃmA load current, from HWÃ02) Overcurrent shut-down: as of 2.8 A Output current with ground connection interrupt when switched off: < 1 mA
Product properties	Type: block modular Product type: I/O component Product family: AxiolineÃF Mounting position: any (no temperature derating) Scope of delivery: including bus base module and AxiolineÃF connectors Insulation characteristics Overvoltage category: II (IEC 60664-1, ENÃ60664-1) Pollution degree: 2 (IEC 60664-1, ENÃ60664-1)
Electrical properties	Maximum power dissipation for nominal condition: 4.25 W Potentials: AxiolineÃF local bus supply (U Supply voltage: 5 VÃDC (via bus base module) Current draw: max. 150 mA (up to HWÃ01) max. 60 mA (from HWÃ02) Power consumption: max. 750 mW (up to HWÃ01) max. 300 mW (from HWÃ02) Potentials: Supply for digital output modules (U Supply voltage: 24 VÃDC Supply voltage range: 19.2 VÃDC ... 30 VÃDC (including all tolerances, including ripple) Current draw: max. 16 A (Provide external protection; if the total current of 8ÃA is exceeded, connect the supply at the power connector parallel via both terminal points.) Power consumption: max. 480 W (of which 3.5ÃW are internal losses) Protective circuit: Surge protection; electronic (35 V, 0.5 s) Reverse polarity protection; parallel diode; with external 5ÃA fuse (only for commissioning) Electrical isolation/isolation of the voltage ranges Test voltage: 5ÃV supply of the local bus (U_Bus) / 24ÃV supply (I/Os): 500 VÃAC, 50 Hz, 1 min. Test voltage: 5ÃV supply of the local bus (U_Bus) / functional ground: 500 VÃAC, 50 Hz, 1 min. Test voltage: 24ÃV supply (I/O) / functional ground: 500 VÃAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: AxiolineÃF connector Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢Ã¢¬ÃAxiolineÃF: system and installationÃ¢Ã¢¬ user manual. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.5 mm² ... 1.5 mm² Conductor cross section flexible: 0.5 mm² ... 1.5 mm² Conductor cross section AWG: 20 ... 16 Stripping length: 8 mm AxiolineÃF connector Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢Ã¢¬ÃAxiolineÃF: system and installationÃ¢Ã¢¬ user manual. Conductor cross section, rigid: 0.5 mm² ... 1.5 mm² Conductor cross section, flexible: 0.5 mm² ... 1.5 mm² Conductor cross section AWG: 20 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C (Standard applications and applications with UL approval) -40°C ... 70°C (Extended, see section Ã¢Ã¢¬ÃTested successfully: use under extreme ambient conditionsÃ¢Ã¢¬ in the data sheet.) Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Standards and regulations	Protection class: III (IEC 61140, ENÃ61140, VDEÃ0140-1)
Mounting	Mounting type: DIN rail mounting Mounting position: any (no temperature derating)