1080244 PHOENIX CONTACT -

SAC-4PH-MT-FT/2XFT F VP SH - H distributor

H distributor, 4-position, shielded, Plug straight M12, coding: T, on Socket straight M12, coding: T and Socket straight M12, coding: T, for direct current up to 16 A/63 V, Parallel distributor

Cod. Articolo: 1080244 copia - copy

Cod. Fornitore: 1080244 copia - copy

PHOENIX CONTACT

Notes	General: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.Ãby using cable ties.
Product properties	Product type: H-distributor Number of positions: 4 Application: Power supply No. of cable outlets: 3 Shielded: yes Coding: T Thread type: M12 Insulation characteristics Overvoltage category: III Degree of pollution: 3
Electrical properties	Nominal voltage U_N: 63 VÃDC Nominal current I_N: 16 A (at 40Ã°C)
Signaling	Status display: No Status display present: No
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/a9937a460600ab49a2ce519ed56072aa/-S204x204-FJPG Width: 28 mm Height: 47 mm Length: 80 mm Center distance: 35 mm
Material specifications	Material: CuZn CuNi Flammability rating according to UL 94: V0 Seal material: NBR Material of grip body: PBT Contact surface material: Au Contact carrier material: PBT Material for screw connection: Brass, nickel-plated
Connector	Connection 1 Type: Plug straight M12 Coding type: T Connection 2 Type: Socket straight M12 Coding type: T
Mechanical properties	Mechanical data Insertion/withdrawal cycles: > 100
Environmental and real-life conditions	Ambient conditions Degree of protection: IP65 Ambient temperature (operation): -40°C ... 85°C (Plug / socket)
Standards and regulations	Standard designation: M12 connector Standards/specifications: IEC 61076-2-111