1088134 PHOENIX CONTACT -

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/6881deef384bc84d932541ac5617b1fa/-S204x204-FJPG Width: 14.9 mm Height: 62.2 mm Depth: 62 mm
Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
Interfaces	SmartÃElement interface Number of interfaces: 1 Connection method: Card edge connector Transmission speed: See system in which you use the SmartÃElement. Start time until ready to operate: < 500 ms
System properties	Module ID code (hex): none Process data channel: 0 bit Input address area: 0 Byte (All systems except PROFIBUS) 1 Byte (PROFIBUS) Output address area: 0 Byte Required parameter data: 1 Byte Required configuration data: 6 Byte
Product properties	Type: modular Product type: I/O component Product family: Axioline SmartÃElements Mounting position: See the system in which the SmartÃElement is used. Insulation characteristics Overvoltage category: II (IEC 60664-1) Pollution degree: 2 (ENÃ60664-1)
Electrical properties	Potentials: Communications power supply of the Smart Elements (U Supply voltage: using card edge connectors Electrical isolation/isolation of the voltage ranges Test voltage: Communications supply / functional ground: 500 VÃAC, 50 Hz, 1 min.
Connection data	Connection method: without
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Standards and regulations	Protection class: III (IEC 61140, ENÃ61140, VDEÃ0140-1)
Mounting	Mounting type: Smart Element slot Mounting position: See the system in which the SmartÃElement is used.