Automazione Industriale

Meccatroinca

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 1094767
PHOENIX CONTACT 1094767
PHOENIX CONTACTNon disponibile

PLC-RPT-24DC/1/SSI - Relay Module

PLC-INTERFACE, consisting of basic terminal block with Push-in connection and plug-in miniature relay with internal amplifier circuit and an appropriate auxiliary supply for weak signal sources, 1 N/O contact, 24VDC nominal input voltage
Cod. Articolo: 1094767 copia - copy
Cod. Fornitore: 1094767 copia - copy
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Download
Caratteristiche Tecniche
Product propertiesProduct type: Relay Module
Product family: PLC-INTERFACE
Application: weak signal sources
Operating mode: 100% operating factor
Mechanical service life: 2x 107 cycles
Electrical propertiesMaximum power dissipation for nominal condition: 0.2 W
Insulation characteristics: Coil/contact
Rated insulation voltage: 250 V
Rated impulse withstand voltage: 6 kV
Overvoltage category: III
Degree of pollution: 3
Supply
Nominal supply voltage: 24 VÂDC (Us)
Input current: 9 mA
Input dataCoil side
Nominal input voltage UN: 24 VÂDC
Input voltage range: 19.2 VÂDC ... 28.8 VÂDC
Drive and function: monostable
Drive (polarity): polarized
Typical input current at UN: 1 mA
Typical response time: 5 ms
Typical release time: 7 ms
Protective circuit: Surge protection
Operating voltage display: Yellow LED
Output dataSwitching
Contact switching type: 1 N/O contact
Type of switch contact: Single contact
Contact connection type: Power contact
Contact material: AgSnO
Maximum switching voltage: 250 V AC/DC
Minimum switching voltage: 12 V AC/DC
Limiting continuous current: 6 A
Maximum inrush current: 10 A (4 s)
Min. switching current: 10 mA
Short-circuit current: 200 A (conditional short-circuit current)
Interrupting rating (ohmic load) max.: 140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity min.: 120 mW
Output fuse: 4 A gL/gG NEOZED
Connection dataConnection method: Push-in connection
Stripping length: 10 mm
Conductor cross section rigid: 0.14 mm² ... 2.5 mm²
Conductor cross section flexible: 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG: 26 ... 14
DimensionsWidth: 6.2 mm
Height: 80 mm
Depth: 94 mm
Environmental and real-life conditionsAmbient conditions
Degree of protection (Relay base): IP20 (Relay base)
Degree of protection (Installation location): ≥ IP54 (Installation location)
Ambient temperature (operation): -25°C ... 60°C
Ambient temperature (storage/transport): -40°C ... 85°C
Altitude: ≤ 2000 m
ApprovalsCE
Certificate: CE-compliant
UKCA
Certificate: UKCA-compliant
Shipbuilding approval
Certificate: TAE0000196
Corrosive gas test
Identification: ISA-S71.04. G3 Harsh Group
ENÂ60068-2-60
DNV GL data
Temperature: D
Humidity: A
Vibration: B/C
EMC: B
Enclosure: Required protection according to the Rules shall be provided upon installation on board
EMC dataLow Voltage Directive: Conformance with Low Voltage Directive
Electromagnetic compatibility: Conformance with EMC directive
Standards and regulationsStandards/regulations: IEC 60947-5-1
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00006.pdf

Approvals_01560.pdf

Approvals_01561.pdf

Approvals_01883.pdf

Manufacturer_declaration_03375.pdf

Manufacturer_declaration_03376.pdf

Manufacturer_declaration_03596.pdf

Manufacturer_declaration_06351.pdf

Package_slip_01741.pdf

Product_information_00033.pdf

Product_information_00063.pdf

Technical_drawing_08271.pdf