1102626 PHOENIX CONTACT -

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/11222c50825d6541ae7d9a05b9cf8313/-S204x204-FJPG Width: 284 mm Height: 364 mm Depth: 121 mm
Material specifications	Material: Polycarbonate PC Polyamide Neoprene Flammability rating according to UL 94: V0 (Housing, a vertically clamped sample is extinguished within 10Ãseconds, no flaming droplets of molten plastic, smoldering for a maximum of 60Ãseconds) V2 (Cable gland; a vertically tensioned sample is extinguished within 30Ãseconds; flaming droplets are permitted) Impact strength: IK10 (in accordance with IEC 62262: Impact energy of 20ÃJ, corresponds to 5Ãkg from a height of 40Ãcm)
Mounting	Mounting type: Wall mounting Mast mounting
Interfaces	Basic functions: Store-and-forward switch, complies with IEEEÃ802.3 Data: Ethernet / Fast Ethernet / Gigabit Ethernet Transmission speed: 10/100/1000 Mbps Connection method: RJ45 jack No. of channels: 4 (RJ45 ports) Transmission length: 100 m (per segment) Transmission medium: Copper Maximum output power: 165 W (>55°CÃderating, see data sheet) 155 W (If switching output is active, >55°CÃderating) 90 W (per port POE1...3, >50°CÃderating, see data sheet) 30 W (POE4) Data: Ethernet / Fast Ethernet / Gigabit EthernetÃ¢Ã¢¬Ã¢¹ Transmission speed: 100/1000 Mbps (depending on the SFP module used) Connection method: SFP No. of channels: 2 (SFP ports) Transmission length: < 80 km (depending on the SFP module used) Transmission medium: depending on the SFP module used Data: Configuration interface Connection method: RJ45 jack No. of channels: 1 (RJ45 port) Data: Switching output Connection method: Push-in spring connection No. of channels: 1 (Push-in Technology) Single conductor/terminal point, rigid: 0.2 mm² ... 1.5 mm² Single-wire/terminal point, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 0.75 mm² (Stripping length 8 mm) Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² (Stripping length 8 mm) Max. AWG conductor cross section, flexible: 16 Min. AWG conductor cross section, flexible: 24 Stripping length: 10 mm Load/output load current output: no inductive load Output nominal voltage: 24 VÃDC Ã±10Ã% (Supply for devices within the SmartÃEthernetÃBox) Output current: 300 mA (typical)
Product properties	Product type: Switch Product family: Smart Ethernet Box MTTF: 450 Years (SNÃ29500 standard, temperatureÃ25°C, operating cycleÃ21%) 228 Years (SNÃ29500 standard, temperatureÃ40°C, operating cycleÃ34.25%) 96 Years (SNÃ29500 standard, temperatureÃ40°C, operating cycleÃ100%) Insulation characteristics Protection class: I (Protective grounding of all conductive housing parts) Insulation characteristicsÃ¢Ã¢¬Ã¢¹ Overvoltage category: III (With protection modules plugged in) II (Without protection modules) Pollution degree: 2 Switch functions Diagnostic functions: RMON History LLDP (Link Layer Discovery Protocol) SNMP traps N:1-Portmirroring ACD (Address Conflict Detection) Basic functions: Store-and-forward switch, complies with IEEEÃ802.3 Filter functions: Port prioritization VLAN (up to 32 VLANs) IP parameterization: DHCP client BootP Static IP address MAC address table: 8k Management: Web-based management (HTTP/HTTPS) SNMPv2/v3 Command Line Interface (Telnet, SSH) Redundancy: RSTP (Rapid Spanning Tree Protocol in accordance with IEEEÃ802.1D-2004) Large Tree Support FRD (Fast Ring Detection) Additional functions: Jumbo frames Time synchronization: SNTP (Simple Network Time Protocol) Security functions Basic functions: Store-and-forward switch, complies with IEEEÃ802.3
Electrical properties	Rated insulation voltage: 3 kV AC (Input / output, IEC/ENÃ60950-1) Supply Supply voltage range: 100 VÃAC ... 240 VÃAC -15Ã%Ã...Ã+10Ã% (Single-phase)
Connection data	Supply Connection method: Push-in spring connection Conductor cross section flexible, with ferrule without plastic sleeve: 0.2 mm² ... 4 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.2 mm² ... 4 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve: 0.5 mm² ... 1.5 mm² Single conductor/terminal point, rigid: 1 mm² ... 6 mm² Single-wire/terminal point, flexible: 0.2 mm² ... 6 mm² Conductor cross section, flexible [AWG]: 24 ... 10 Stripping length: 10 mm
Environmental and real-life conditions	Ambient conditions Degree of protection: IP65 (in accordance with DINÃENÃ60529: Complete touch protection, dust cannot enter, spray water from any direction) Impact strength: IK10 (in accordance with IEC 62262: Impact energy of 20ÃJ, corresponds to 5Ãkg from a height of 40Ãcm) Ambient temperature (operation): -40°C ... 70°C (>50°CÃderating) Ambient temperature (storage/transport): -40°C ... 85°C Altitude: 2000 m Permissible humidity (operation): 10 % ... 95 % (non-condensing)
Standards and regulations	Other resistance: UV-resistant in accordance with UL746C, f1 listing/rating Outdoor housing, subject to 1,000Ãhour xenon weather testing, 7-day water submergence test Standards/regulations: IEC 62444 IEC 61249-2-21 DINÃENÃ45545-2, requirement set R22, hazard level HL3 Standard designation: Strain relief Halogen-free (housing, bromine:Ã<900Ãppm, chlorine:Ã<900Ãppm, total halogen content:Ã<1,500Ãppm) Fire protection
Approvals	CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant UL, USA/Canada Identification: Listed ULÃ61010-1, 3rd Edition ULÃ61010-2-201, 2nd Edition CAN/CSAÃC22.2 No.Ã61010-1-12 CSAÃC22.2 No.Ã61010-2-201:18 Corrosive gas test Identification: ISA-S71.04-1985 G3 Harsh Group A
EMC data	Noise immunity: EN 61000-6-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Conducted noise emission: ENÃ61000-6-3 Class B, domain of use: residential and small commercial Noise emission: ENÃ61000-6-4, ClassÃB, domain of use: residential and small commercial Electrostatic discharge Standards/regulations: ENÃ61000-4-2 Electrostatic dischargeÃ¢Ã¢¬Ã¢¹ Contact discharge: Ã± 6 kV Discharge in air: Ã± 8 kV Indirect discharge: Ã± 6 kV Comments: Criterion B Electromagnetic HF field Standards/regulations: ENÃ61000-4-3 Electromagnetic HF fieldÃ¢Ã¢¬Ã¢¹ Frequency range: 80 MHz ... 3 GHz (80%Ãamplitude modulation with 1ÃkHz) Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: ENÃ61000-4-4 Fast transients (burst)Ã¢Ã¢¬Ã¢¹ Input: Ã± 2.2 kV (1Ãminute) Signal: Ã± 2.2 kV (1Ãminute) Comments: Criterion B Surge current load (surge) Standards/regulations: ENÃ61000-4-5 Surge current load (surge)Ã¢Ã¢¬Ã¢¹ Input: Ã± 1 kV (AC supply, line to line) Ã± 2 kV (AC supply, line to ground) Conducted interference Standards/regulations: ENÃ61000-4-6 Conducted interferenceÃ¢Ã¢¬Ã¢¹ Frequency range: 0.15 MHz ... 80 MHz (80%Ãamplitude modulation with 1ÃkHz) Comments: Criterion A Voltage: 10 V Emitted interference Standards/regulations: ENÃ61000-6-4 Comments: Class B, domain of use: residential and small commercial Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.
System properties	Functionality Basic functions: Store-and-forward switch, complies with IEEEÃ802.3