Non disponibile 
| Product properties | Product type: Solid-state contactor Product family: CONTACTRON Operating mode: 100% operating factor MTTF: 244 Years (ïâ¦Ã = 20 °C ) Data management status Article revision: 03 Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Basic insulation |
| Electrical properties | Number of phases: 1 Switching frequency: ââ°¤ 10 Hz Mains type: 1-phase Test voltage (Input/output): 2.5 kVrms (50 Hz, 60 s) Insulation characteristics Rated insulation voltage: 50 V Rated surge voltage: 800 V Overvoltage category: III Degree of pollution: 2 Air clearances and creepage distances between the power circuits: Basic insulation |
| Input data | Input name: DC input Rated control circuit supply voltage US: 24 V DC Control supply voltage range: 13 V DC ... 30 V DC Protective circuit: Surge protection Control Input name: Control input right/left Current consumption: 3 mA Rated actuating voltage UC: 24 V DC Triggering voltage range: 19.2 V DC ... 28.8 V DC Rated actuating current IC: < 2 mA Protective circuit: Reverse polarity protection Surge protection Surge voltage protection: > 33 V DC Switchover time RL/LL (turn-on time): 5 ms |
| Output data | DC output Rated operating voltage Ue: 24 V DC Operating voltage range: 11 V DC ... 30 V DC Rated operating current (DC-13 / Load output): 3 A (see to derating) Quiescent current: ïâ» 14 mA Short-circuit current: 100 A Protective circuit: Reverse polarity protection Surge protection Surge voltage protection: > 33 V DC Current limitation at short-circuits: 75 A |
| Connection data | Control circuits Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14 Load circuit Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14 |
| Signaling | Status display: LED (yellow) Operating voltage display: Green LED Error indication: Red LED |
| Dimensions | Width: 12.5 mm Height: 107 mm Depth: 114.5 mm |
| Material specifications | Color: gray (RAL 7042) |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25 °C ... 70 °C Ambient temperature (storage/transport): -40 °C ... 80 °C Altitude: ââ°¤ 2000 m |
| Approvals | UKCA Certificate: UKCA-compliant UL approval Certificate: NKCR.E172140 |
| Standards and regulations | Air clearances and creepage distances between the power circuits Standards/regulations: EN 60947-5-1 |
| Mounting | Mounting type: DIN rail mounting Assembly note: alignable, for spacing see derating Mounting position: vertical (horizontal DIN rail, motor output below) |
Di seguito alcuni articoli correlati a quello che stai vedendo
