1417430 PHOENIX CONTACT -

VS-08-M12MS-10G-P SCO - Data connector

Data connector, Ethernet CAT6_A (10 Gbps), 8-position, shielded, Plug straight M12 SPEEDCON, coding: X, Piercecon^® fast connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

Cod. Articolo: 1417430 copia - copy

Cod. Fornitore: 1417430 copia - copy

PHOENIX CONTACT

Notes	General: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.Ãby using cable ties.
Mounting	Connection method: Piercecon^Ã® fast connection
Product properties	Product type: Circular connector (cable-side) Sensor type: Ethernet Number of positions: 8 Application: Data No. of cable outlets: 1 Shielded: yes Coding: X Cable outlet: straight Insulation characteristics Overvoltage category: II Degree of pollution: 3
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/e386f08fcf200d4d87a59fa5b807770f/-S204x204-FJPG Length: 46.5 mm Wrench size, union nut: 13 mm External dimensions Outside diameter: 4 mm ... 8 mm Housing Diameter housing: 15 mm
Material specifications	Flammability rating according to UL 94: V0 Seal material: NBR Material of grip body: Zinc die-cast, nickel-plated Contact material: CuSn Contact surface material: Ni/Au Contact carrier material: PP Material for screw connection: Zinc die-cast, nickel-plated
Connection data	Conductor connection Connection method: Piercecon^Ã® fast connection Connection cross section: 0.14 mm² ... 0.14 mm² (flexible) Connection cross section AWG: 26 (flexible) Tightening torque: 0.4 Nm (M12 knurl) 2 Nm (Screw plug insert with sleeve housing as far it will go) 1 Nm (Pressure nut with coupling sleeve)
Electrical properties	Rated surge voltage: 0.8 kV Contact resistance: Ã¢Ã¢°¤ 10 mÃ© Insulation resistance: Ã¢Ã¢°¥ 100 MÃ© Nominal voltage U_N: 48 VÃAC 60 VÃDC Nominal current I_N: 0.5 A (30 W)
Mechanical properties	Mechanical data Insertion/withdrawal cycles: Ã¢Ã¢°¥ 100
Connector	Connection 1 Head design: Plug Head cable outlet: straight Head thread type: M12 Head locking type: SPEEDCON Coding: X
Cable/line	Signal type/category: Ethernet CAT6_A (IEC 11801), 10 Gbps
Environmental and real-life conditions	Ambient conditions Degree of protection: IP65 Ambient temperature (operation): -40°C ... 85°C (Plug / socket)
Standards and regulations	M12 Standard designation: M12 connector Standards/specifications: IEC 61076-2-109