1423723 PHOENIX CONTACT -

HC-M-DSUB-09-UT-M - Contact insert module

Contact insert module, number of positions: 9, type : D-SUB9, Pin, Screw connection, 48 V, 1 A, 0.08 mm²...0.5 mm², application: Data

Cod. Articolo: 1423723 copia - copy

Cod. Fornitore: 1423723 copia - copy

PHOENIX CONTACT

Notes	General: For HEAVYCON housing type B6 to B48, HC-M-B...MF-... module carrier frame required Connectors may be operated only when there is no load/voltage. The use of guide pins (HC-CST) and sockets (HC-CBU) is recommended to prevent tip collision due to misalignment.
Mounting	Assembly instructions: To ensure correct use, installation in housing with IP54 protection or better is required Connection method: Screw connection
Product properties	Product type: Modular contact insert Number of positions: 9 Connection profile: 9 Contact numbering: 1 - 9 Application: Data Number of module slots: 1 Type: D-SUBÃ9 Contact material type: turned Series: HC-M-DSUB-U Insulation characteristics Overvoltage category: III Degree of pollution: 3
Connection data	Connection technology Connection technology: Screw connection Conductor connection Conductor cross section: 0.08 mm² ... 0.5 mm² Connection cross section AWG: 28 ... 20 Tightening torque: 0.03 Nm ... 0.05 Nm Stripping length of the individual wire: 4.2 mm
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/dc3e1c524db6a249b774b212f3826e9a/-S204x204-FJPG Width: 34.2 mm Height: 35.7 mm Length: 14.6 mm Mechanical characteristics Minimum housing height: 72 mm Contact diameter: 1 mm
Electrical properties	Rated voltage (III/3): 48 V Rated surge voltage: 0.8 kV Rated current: 1 A
Mechanical properties	Mechanical data Insertion/withdrawal cycles: Ã¢Ã¢°¥ 500
Material specifications	Material: Zinc alloy Flammability rating according to UL 94: V0 Contact material: Copper alloy Contact surface material: Ag Contact carrier material: PC Standards/regulations: PC: Fire protection in rail vehicles - requirement set R22 acc. to DINÃENÃ45545-2 (Risk level HL1 - HL2) PC: Fire protection in rail vehicles - requirement set R23 acc. to DINÃENÃ45545-2 (Risk level HL1 - HL3)
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -40°C ... 125°C
Standards and regulations	Testing Standards/regulations: PC: Fire protection in rail vehicles - requirement set R22 acc. to DINÃENÃ45545-2 (Risk level HL1 - HL2) PC: Fire protection in rail vehicles - requirement set R23 acc. to DINÃENÃ45545-2 (Risk level HL1 - HL3)