Non disponibile 
| Notes | General: For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B24 type Connectors may be operated only when there is no load/voltage. |
| Product properties | Type: B24 for the left side of the control cabinet Product type: Terminal adapter Number of positions: 24 Connection profile: 24+PE Contact numbering: 1 - 24 Series: HC-B Screwdriver blade: 0.5 x 3.5 mm Insulation characteristics Overvoltage category: III Degree of pollution: 3 |
| Electrical properties | Rated voltage (III/3): 500 V Rated surge voltage: 6 kV Rated current: 16 A SCCR: 5 kA (UL 2237) |
| Connection data | Connection technology Connection technology: Screw connection Connection in acc. with standard: IEC / EN Conductor connection Conductor cross section: 0.5 mm² ... 2.5 mm² Connection cross section AWG: 20 ... 14 Tightening torque: 0.5 Nm ... 0.8 Nm Stripping length of the individual wire: 12 mm |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/c6f56472c1bff7419f58dc81c410c6ab/-S204x204-FJPG Width: 34 mm Height: 74.2 mm Length: 111 mm Drill hole distance, horizontal: 104 mm Drill hole distance, vertical: 27 mm |
| Material specifications | Flammability rating according to UL 94: V0 Contact material: Copper alloy Contact surface material: Ag Contact carrier material: PA Standards/regulations: PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DINÃENÃ45545-2 (Risk level HL1 - HL3) |
| Cable/line | Stripping length of the individual wire: 12 mm |
| Mechanical properties | Mechanical data Insertion/withdrawal cycles: ââ°¥ 500 |
| Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -40°C ... 125°C |
| Standards and regulations | Constructional and testing regulations: DINÃENÃ61984 DINÃENÃ60664 IEC 60352 Tests: DINÃENÃ61984 DINÃENÃ60664 IEC 60352 Testing Standards/regulations: PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DINÃENÃ45545-2 (Risk level HL1 - HL3) |
| Mounting | Assembly instructions: To ensure correct use, installation in housing with IP54 protection or better is required Connectors may only be actuated when there is no load/voltage. |
Di seguito alcuni articoli correlati a quello che stai vedendo
