1648403 PHOENIX CONTACT -

HC-B 10-A-DT-PEL-M - Terminal adapter

HEAVYCON terminal adapter, pin insert, B10 series, 10-pos., for the left side of the control cabinet, push-in connection

Cod. Articolo: 1648403 copia - copy

Cod. Fornitore: 1648403 copia - copy

PHOENIX CONTACT

Notes	General: For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B10 type Connectors may be operated only when there is no load/voltage.
Product properties	Type: B10 for the left side of the control cabinet Product type: Terminal adapter Number of positions: 10 Connection profile: 10+PE Contact numbering: 1 - 10 Series: HC-B Insulation characteristics Overvoltage category: III Degree of pollution: 3
Electrical properties	Rated voltage (III/3): 500 V Rated surge voltage: 6 kV Rated current: 16 A SCCR: 5 kA (UL 2237)
Connection data	Connection technology Connection technology: Push-in connection Conductor connection Conductor cross section: 0.5 mm² ... 2.5 mm² Connection cross section AWG: 22 ... 12 Stripping length of the individual wire: 10 mm (13Ãmm with ferrule)
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/5940f40463c4b34fbe2e80b7fa92fb25/-S204x204-FJPG Width: 34 mm Height: 70.5 mm Length: 64 mm Drill hole distance, horizontal: 57 mm Drill hole distance, vertical: 27 mm
Material specifications	Flammability rating according to UL 94: V0 Contact material: Copper alloy Contact surface material: Ag Contact carrier material: PA Standards/regulations: PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DINÃENÃ45545-2 (Risk level HL1 - HL3)
Cable/line	Stripping length of the individual wire: 10 mm (13Ãmm with ferrule)
Mechanical properties	Mechanical data Insertion/withdrawal cycles: Ã¢Ã¢°¥ 500
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 125°C
Standards and regulations	Constructional and testing regulations: DINÃENÃ61984 DINÃENÃ60664 IEC 60352 Tests: DINÃENÃ61984 DINÃENÃ60664 IEC 60352 Testing Standards/regulations: PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DINÃENÃ45545-2 (Risk level HL1 - HL3)
Mounting	Assembly instructions: To ensure correct use, installation in housing with IP54 protection or better is required Connectors may be plugged in only when there is no load/voltage.