2688530 PHOENIX CONTACT -

AXL F BK PB - Bus coupler

AxiolineF, Bus coupler, PROFIBUS DP, D-SUB-9 female connector, transmission speed in the local bus:100 Mbps, degree of protection: IP20, including bus base module and AxiolineF connector

Cod. Articolo: 2688530 copia - copy

Cod. Fornitore: 2688530 copia - copy

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/aed70c619790314a9b0dbcd24cd1e6cc/-S204x204-FJPG Width: 45 mm Height: 126.1 mm Depth: 74 mm Note on dimensions: The depth applies when a THÃ35-7.5 DIN rail is used (in accordance with ENÃ60715).
Interfaces	PROFIBUS DP Number of interfaces: 1 Connection method: D-SUB-9 female connector Transmission speed: 9.6 kbps ... 12 Mbps AxiolineÃFÃlocal bus Number of interfaces: 1 Connection method: Bus base module Transmission speed: 100 Mbps Service Number of interfaces: 1 Connection method: Micro USB type B Fieldbus: Local bus gateway Max. number of local bus devices: 63 (Consider the logic current consumed by the devices)
System properties	System limits Number of supported devices: max. 63 (per station) Number of local bus devices that can be connected: max. 63
Product properties	Type: block modular Product type: I/O component Product family: AxiolineÃF Mounting position: any (observe temperature derating) Scope of delivery: including bus base module and AxiolineÃF connector Insulation characteristics Overvoltage category: II (IEC 60664-1, ENÃ60664-1) Pollution degree: 2 (IEC 60664-1, ENÃ60664-1)
Electrical properties	Potentials: Communications power U Supply voltage: 24 VÃDC Supply voltage range: 19.2 VÃDC ... 30 VÃDC (including all tolerances, including ripple) Current draw: max. 567 mA (with 2ÃA at U_Bus for the I/Os and U_L = 24 V) Power consumption: max. 13.7 W (2.0ÃA on U_Bus, U_LÃ=Ã24ÃV) Protective circuit: Surge protection; electronic Reverse polarity protection; electronic Potentials: AxiolineÃF local bus supply (U Supply voltage: 5 VÃDC (via bus base module) Power supply unit: 2 A Electrical isolation/isolation of the voltage ranges Test voltage: PROFIBUS interface / 24 V communications voltage (U_L) feed-in: 500 VÃAC, 50 Hz, 1 min. Test voltage: PROFIBUS interface / functional ground: 500 VÃAC, 50 Hz, 1 min. Test voltage: 24 V communications voltage (U_L) feed-in / functional ground: 500 VÃAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: AxiolineÃF connector Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢Ã¢¬ÃAxiolineÃF: system and installationÃ¢Ã¢¬ user manual. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm AxiolineÃF connector Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢Ã¢¬ÃAxiolineÃF: system and installationÃ¢Ã¢¬ user manual. Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C (Mounting position: wall mounting on horizontal DIN rail) -25°C ... 55°C (Mounting position: any) Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Standards and regulations	Protection class: III (IEC 61140, ENÃ61140, VDEÃ0140-1)
Mounting	Mounting type: DIN rail mounting Mounting position: any (observe temperature derating)