2800913 PHOENIX CONTACT -

CB E1 24DC/8A S-R P - Electronic circuit breaker

Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.

Cod. Articolo: 2800913 copia - copy

Cod. Fornitore: 2800913 copia - copy

PHOENIX CONTACT

Product properties	Type: Male Product type: Device circuit breakers Product family: CBÃE Number of positions: 1 No. of channels: 1 Insulation characteristics Degree of pollution: 2
Electrical properties	No. of channels: 1 Maximum load current: 8 A Maximum current with single arrangement: 8 A General Operating voltage: 24 VÃDC 18 VÃDC ... 30 VÃDC Nominal current I_N: 8 A Rated insulation voltage U_i: 30 V (Load circuit) Rated surge voltage: 0.5 kV Tripping method: E (electronic) Required backup fuse: not required, integrated failsafe element Dielectric strength: max. 30 VÃDC (Load circuit) Active current limitation: typ. 1.25 x I_N Fuse: electronic Closed circuit current I₀: typ. 8 mA (When switched on) typ. 11 mA (With status output) Power dissipation: 1.06 W (Nominal operation) Temperature derating: 7.2 A (at 50Ã°C) MTBF (IEC 61709, SN 29500): 7200000 h (at 25Ã°C with 80Ã% load) 6330000 h (at 40Ã°C with 80Ã% load) Voltage drop: 100 mV (at I_N) Fail-safe element: 15 AÃDC Load circuit Shutdown time: 100 ms (see time/current characteristic curve) Undervoltage switch-off: < 14 V (typ. OFF) > 17 V (typ. ON) Max. capacitive load: 20000 ÃµF Auxiliary contact Contact connection type: Positive-switching signal output Reset Input voltage range: 7 VÃDC ... 30 VÃDC (Reset with falling edge) Current consumption: typ. 2.6 mA (at 24 V DC) Pulse length: min. 20 ms Voltage: < 3 VÃDC (Low state) > 8 VÃDC (High state) Status output Output voltage: 24 VÃDC Output current: max. 0.2 A (Short-circuit-proof)
Connection data	Maximum load current: 8 A Connection method: pluggable
Dimensions	Width: 12.3 mm Height: 45 mm Depth: 52 mm
Material specifications	Flammability rating according to UL 94: V-0
Environmental and real-life conditions	Ambient conditions Degree of protection: IP30 (Actuation area) Ambient temperature (operation): -25°C ... 50°C Ambient temperature (storage/transport): -40°C ... 70°C Humidity test: 96Ãh, 95Ã%ÃRH, 40Ã°C Vibration (operation): 3g (according to IEC 60068-2-6, Test Fc)
Approvals	UL approval Identification: UL Listed ULÃ508 UL Recognized UL 2367 Shipbuilding approval Identification: DNV GL
Standards and regulations	Standard designation: EMV Standards/specifications: ENÃ61000-6-3 ENÃ61000-6-2 Note: Interference emission Noise immunity
Mounting	Mounting type: on base element