2900458 PHOENIX CONTACT -

PLC-BPT-TTL/1 - Relay base

6.2 mm PLC basic terminal block for TTL signal with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage TTL (5 V DC)

Cod. Articolo: 2900458 copia - copy

Cod. Fornitore: 2900458 copia - copy

PHOENIX CONTACT

Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
Product properties	Product type: Relay socket Product family: PLC-INTERFACE Application: TTL signal at input Operating mode: 100% operating factor
Input data	Nominal input voltage U_N: 5 VÃDC (TTL) Relay assembly Rated control circuit supply voltage U_S: 5 VÃDC Voltage range with reference to U_S: 0.9 ... 1.2 Rated control supply current I_S: 41 mA Rated actuating voltage U_C: 5 VÃDC (TTL) Voltage range with reference to U_C: 0.9 ... 1.2 Rated actuating current I_C: 2.5 mA Typical response time: 4.5 ms Typical release time: 3.5 ms Operating voltage display: Yellow LED Protective circuit: Reverse polarity protection Surge protection Surge voltage protection: > 6.5 V Optocoupler assembly Rated control circuit supply voltage U_S: 5 VÃDC Voltage range with reference to U_S: 0.9 ... 1.2 Rated control supply current I_S: 11.5 mA Rated actuating voltage U_C: 5 VÃDC (TTL) Rated actuating current I_C: 2.5 mA Switching level 1 signal ("H") (TTL signal): > 2 VÃDC Switching level 0 signal ("L") (TTL signal): < 0.8 VÃDC Typical response time: 35 Ãµs Typical release time: 320 Ãµs Operating voltage display: Yellow LED Protective circuit: Reverse polarity protection Surge protection Transmission frequency: 1000 Hz Surge voltage protection: > 6.5 V
Output data	Maximum switching voltage: 48 VÃDC 33 VÃDC Minimum switching voltage: 3 VÃDC Limiting continuous current: 100 mA 3 A Voltage drop at max. limiting continuous current: < 1 V < 200 mV Output circuit: 2-conductor, floating Protective circuit: Reverse polarity protection Surge protection Reverse polarity protection Surge protection Maximum inrush current: 15 A (10 ms)
Connection data	Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² (Single ferrule) 2x 0.5 mm² ... 1 mm² (TWIN ferrule) Conductor cross section AWG: 26 ... 14
Dimensions	Width: 6.2 mm Height: 80 mm Depth: 94 mm
Material specifications	Flammability rating according to UL 94: V0 (Housing)
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C
Approvals	Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group ENÃ60068-2-60
Mounting	Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any