2904618 PHOENIX CONTACT -

Input data	Control input (configurable) Rem: Output power ON/OFF (SLEEP MODE) Default: Output power ON (>40 kÃ¢Ã¢¦/24 V DC/open bridge between Rem and SGnd) AC operation Network type: Star network Nominal input voltage range: 100 V AC ... 240 V AC Input voltage range: 100 V AC ... 240 V AC -15 % ... +10 % Derating: < 100 V AC (1 %/V) Electric strength, max.: 300 V AC 60 s Typical national grid voltage: 120 V AC 230 V AC Voltage type of supply voltage: AC Inrush current: typ. 12 A (at 25 °C) Inrush current integral (I²t): < 0.3 A²s Inrush current limitation: 12 A (after 1 ms) AC frequency range: 50 Hz ... 60 Hz -10 % ... +10 % Frequency range (f_N): 50 Hz ... 60 Hz -10 % ... +10 % 16.7 Hz (acc. to EN 50163) Mains buffering time: typ. 27 ms (120 V AC) typ. 27 ms (230 V AC) Current consumption: 13.6 A (100 V AC) 9.9 A (120 V AC) 5.4 A (230 V AC) 5.4 A (240 V AC) Nominal power consumption: 1072 VA Protective circuit: Transient surge protection; Varistor, gas-filled surge arrester Switch-on time: < 1 s Typical response time: 300 ms (from SLEEP MODE) Input fuse: 16 A (slow-blow, internal) Recommended breaker for input protection: 16 A ... 20 A (Characteristic B, C, D, K or comparable) Discharge current to PE: < 3.5 mA 1.7 mA (264 V AC, 60 Hz) DC operation Nominal input voltage range: 110 V DC ... 250 V DC Input voltage range: 110 V DC ... 250 V DC -18 % ... +40 % Derating: < 110 V DC (1 %/V) Voltage type of supply voltage: DC Current consumption: 12 A (110 V DC) 5 A (250 V DC)
Output data	Efficiency: typ. 94.7 % (120 V AC) typ. 95.7 % (230 V AC) Output characteristic: U/I Advanced Smart HICCUP FUSE MODE Nominal output voltage: 24 V DC Setting range of the output voltage (U_Set): 24 V DC ... 28 V DC (constant capacity) Nominal output current (I_N): 40 A Static Boost (I_Stat.Boost): 45 A Dynamic Boost (I_Dyn.Boost): 60 A (5 s) Selective Fuse Breaking (I_SFB): 215 A (15 ms) Magnetic circuit breaker tripping: A1...A40 / B2...B25 / C1...C13 / Z1...Z16 Derating: > 60 °C ... 70 °C (2.5 %/K) Feedback voltage resistance: Ã¢Ã¢°¤ 35 V DC Protection against overvoltage at the output (OVP): < 30 V DC (double protection with shut off within 20 ms) Control deviation: < 0.5 % (Static load change 10 % ... 90 %) < 2 % (Dynamic load change 10 % ... 90 %, (10 Hz)) < 0.25 % (change in input voltage Ã±10 %) Residual ripple: < 40 mV_PP (with nominal values) Short-circuit-proof: yes No-load proof: yes Output power: 960 W 1080 W 1440 W Maximum no-load power dissipation: < 5 W (120 V AC) < 5 W (230 V AC) Power loss nominal load max.: < 55 W (120 V AC) < 44 W (230 V AC) Power dissipation SLEEP MODE: < 3 W (120 V AC) < 3 W (230 V AC) Crest factor: typ. 1,7 (120 V AC) typ. 1.65 (230 V AC) Rise time: < 60 ms (U_Out = 10 % ... 90 %) Connection in parallel: yes, for redundancy and increased capacity Connection in series: yes Signal Signal ground SGnd: Reference potential for Out1, Out2, and Rem Signal Out 1 (configurable) Digital: 24 V DC 20 mA Default: 24 V DC 20 mA 24 V DC for U_Out > 0.9 x U_Set Signal Out 2 (configurable) Digital: 24 V DC 20 mA Analog: 4 mA ... 20 mA Ã±5 % (Load Ã¢Ã¢°¤400 Ã©) Default: 24 V DC 20 mA 24 V DC for P_Out < P_N Signal relay 13/14 (configurable) Default: closed (U_out > 0.9 U_Set) Digital: 24 V DC 1 A 30 V AC/DC 0.5 A
Connection data	Input Connection method: Screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 6 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 4 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, min.: 0.25 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, max.: 4 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, min.: 0.25 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, max.: 4 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 10 Stripping length: 8 mm Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Output Connection method: Screw connection Conductor cross section, rigid min.: 0.5 mm² Conductor cross section, rigid max.: 16 mm² Conductor cross section flexible min.: 0.5 mm² Conductor cross section flexible max.: 16 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, min.: 0.5 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, max.: 16 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, min.: 0.5 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, max.: 16 mm² Conductor cross section AWG min.: 20 Conductor cross section AWG max.: 6 Stripping length: 10 mm Tightening torque, min: 1.2 Nm Tightening torque max: 1.5 Nm Signal Connection method: Push-in connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 1 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 1.5 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, min.: 0.2 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, max.: 0.75 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, min.: 0.2 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, max.: 1.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 16 Stripping length: 8 mm
Signaling	Types of signaling: LED Floating signal contact Active signal output Out1 (digital, configurable) Active signal output Out2 (analog, configurable) Remote contact Signal ground SGnd Signal output P_Out: > 100 % (LED lights up yellow, output power > 960 W) > 75 % (LED lights up green, output power > 720 W) > 50 % (LED lights up green, output power > 480 W) U_Out: > 0.9 x U_Set (LED lights up green) < 0.9 x U_Set (LED flashes green)
Electrical properties	Number of phases: 1.00 Insulation voltage input/output: 4 kV AC (type test) 2 kV AC (routine test) Switching frequency: 85.00 kHz ... 107.00 kHz (Auxiliary converter stage) 45.00 kHz ... 200.00 kHz (Main converter stage) 50.00 kHz ... 500.00 kHz (PFC stage)
Product properties	Product type: Power supply Product family: QUINT POWER MTBF (IEC 61709, SN 29500): > 908000 h (25 °C) > 539000 h (40 °C) > 243000 h (60 °C) Data management status Article revision: 00 Insulation characteristics Protection class: I Degree of pollution: 2 Life expectancy (electrolytic capacitors) Current: 20 A Temperature: 40 °C Time: 360000 h Additional text: 120 V AC Life expectancy (electrolytic capacitors)Ã¢Ã¢¬Ã¢¹ Current: 20 A Temperature: 40 °C Time: 455000 h Additional text: 230 V AC Life expectancy (electrolytic capacitors)Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Current: 40 A Temperature: 25 °C Time: 389000 h Additional text: 120 V AC Life expectancy (electrolytic capacitors)Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Current: 40 A Temperature: 25 °C Time: 460000 h Additional text: 230 V AC Life expectancy (electrolytic capacitors)Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Current: 40 A Temperature: 40 °C Time: 137000 h Additional text: 120 V AC Life expectancy (electrolytic capacitors)Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Current: 40 A Temperature: 40 °C Time: 162000 h Additional text: 230 V AC
Dimensions	Width: 120 mm Height: 130 mm Depth: 140 mm Installation dimensions Installation distance right/left: 5 mm / 5 mm Installation distance top/bottom: 50 mm / 50 mm
Mounting	Mounting type: DIN rail mounting Assembly note: alignable: P_N Ã¢Ã¢°¥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically alignable: P_N <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom Mounting position: horizontal DIN rail NS 35, EN 60715 With protective coating: yes
Material specifications	Flammability rating according to UL 94 (housing / terminal blocks): V0 Housing material: Metal Hood version: Stainless steel X6Cr17 Side element version: Aluminum
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40 °C ... 75 °C (> 60 °C Derating: 2,5 %/K) Ambient temperature (storage/transport): -40 °C ... 85 °C Maximum altitude: Ã¢Ã¢°¤ 5000 m (> 2000 m, observe derating) Climatic class: 3K22 (in accordance with EN 60721-3-3) Max. permissible relative humidity (operation): Ã¢Ã¢°¤ 100 % (at 25 °C, non-condensing) Shock: 11 ms, 15 g, in each space direction (according to IEC 60068-2-27) Vibration (operation): 5 Hz ... 100 Hz resonance search 0.7g, 90 min., resonance frequency 0.7g, 90 min. (in accordance with DNV GL Class A) 5 Hz ... 100 Hz resonance search 2.3g, 90 min., resonance frequency 2.3g, 90 min. (according to DNV GL Class C) mounted with UWA 130 - 2901664
Standards and regulations	Rail applications: EN 50121-3-2 EN 50121-4 EN 50121-5 EN 50163 IEC 62236-3-2 IEC 62236-4 IEC 62236-5 EN 50155 EN 45545-2 (HL3) EN 61373 (Class 1B) HART FSK Physical Layer Test Specification Compliance: Output voltage U_Out compliant Standard Ã¢Ã¢¬Ã¢ Limitation of mains harmonic currents: EN 61000-3-2 Standard - Electrical safety: IEC 61010-2-201 (SELV) Explosive atmosphere: IEC 60079-0 IEC 60079-7 IEC 60079-11 IEC 60079-15 Standard Ã¢Ã¢¬Ã¢ Safety extra-low voltage: IEC 61010-1 (SELV) IEC 61010-2-201 (PELV) Standard - Safe isolation: IEC 61558-2-16 IEC 61010-2-201 Standard - safety for equipment for measurement, control, and laboratory use: IEC 61010-1 Battery charging: DIN 41773-1 Approval - requirement of the semiconductor industry with regard to mains voltage dips: SEMI F47-0706, EN 61000-4-11 Overvoltage category EN 61010-1: II (Ã¢Ã¢°¤ 5000 m) EN 62477-1: III (Ã¢Ã¢°¤ 2000 m) EN 61558-2-16: II (Ã¢Ã¢°¤ 5000 m) Fire protection in rail vehicles Standard designation: Fire protection in rail vehicles Standards/specifications: EN 45545-2 (HL3)
Approvals	CSA: CAN/CSA-C22.2 No. 61010-2-201 CSA-C22.2 No. 107.1-16 Shipbuilding approval: DNV SIQ: CB-Scheme (IEC 61010-1, IEC 61010-2-201) UL approvals: UL Listed UL 508 UL 121201 & CSA C22.2 No. 213-17 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location) applied for Conformity/Approvals ATEX: SIQ 23 ATEX 161 X Ã¯Ã II 3 G Ex ec ic nC IIC T4 Gc INMETRO: DNV 19.0187 X IECEx: IECEx SIQ 23.0001X Ex ec ic nC IIC T4 Gc Functional Safety in accordance with IEC 61508: SIL 3 applied for
EMC data	Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Low Voltage Directive: Conformance with Low Voltage Directive 2014/35/EC EMC requirements for noise emission: EN 61000-6-3 EN 61000-6-4 EMC requirements for noise immunity: EN 61000-6-1 EN 61000-6-2 EMC requirements for power supply: IEC 61850-3 (G,H) EN 61000-6-5 (switching devices) Conducted noise emission: EN 55016 EN 61000-6-3 (Class B) Noise emission: Additional basic standard EN 61000-6-5 (immunity in power station), IEC/EN 61850-3 (energy supply) EN 55016 EN 61000-6-3 (Class B) DNV GL conducted interference: Class A Additional text: Area power distribution DNV GL noise radiation: Class A Harmonic currents Standards/regulations: EN 61000-3-2 EN 61000-3-2 (Class A) Frequency range: 0 kHz ... 2 kHz Flicker Standards/regulations: EN 61000-3-3 Frequency range: 0 kHz ... 2 kHz Electrostatic discharge Standards/regulations: EN 61000-4-2 Electrostatic dischargeÃ¢Ã¢¬Ã¢¹ Contact discharge: 8 kV (Test Level 4) Discharge in air: 15 kV (Test Level 4) Comments: Criterion A Electromagnetic HF field Standards/regulations: EN 61000-4-3 Electromagnetic HF fieldÃ¢Ã¢¬Ã¢¹ Frequency range: 80 MHz ... 1 GHz 1 GHz ... 6 GHz Test field strength: 20 V/m (Test Level 3) 10 V/m (Test Level 3) Comments: Criterion A Fast transients (burst) Standards/regulations: EN 61000-4-4 Fast transients (burst)Ã¢Ã¢¬Ã¢¹ Input: 4 kV (Test Level 4 - asymmetrical) Output: 4 kV (Test Level 4 - asymmetrical) Signal: 4 kV (Test Level 4 - asymmetrical) Comments: Criterion A Surge voltage load (surge) Standards/regulations: EN 61000-4-5 Surge voltage load (surge)Ã¢Ã¢¬Ã¢¹ Input: typ. 3 kV (Test Level 4 - symmetrical) typ. 6 kV (Test Level 4 - asymmetrical) Output: 1 kV (Test Level 3 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Signal: 4 kV (Test Level 4 - asymmetrical) Comments: Criterion A Conducted interference Standards/regulations: EN 61000-4-6 Conducted interferenceÃ¢Ã¢¬Ã¢¹ I/O/S: asymmetrical Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V (Test Level 3) Power frequency magnetic field Standards/regulations: EN 61000-4-8 Frequency: 16.7 Hz 50 Hz 60 Hz 50 Hz 60 Hz 0 Hz Test field strength: 100 A/m 1 kA/m 300 A/m Additional text: 60 s 3 s DC, 60 s Comments: Criterion A Frequency range: 50 Hz ... 60 Hz Voltage dips Standards/regulations: EN 61000-4-11 Voltage: 230 V AC Frequency: 50 Hz Voltage dip: 70 % 40 % 0 % Number of periods: 0.5 / 1 / 25 / 30 periods 5 / 10 / 50 periods 0,5 / 1 / 5 / 50 / 250 periods Additional text: Test Level 2 Comments: Criterion A: 0.5 / 1 / 25 / 30 periods Criterion A Criterion A: 0.5 / 1 period Criterion B: 5 / 50 / 250 periods Pulse-shape magnetic field Standards/regulations: EN 61000-4-9 Test field strength: 1000 A/m Comments: Criterion A Attenuated sinusoidal oscillations (ring wave) Standards/regulations: EN 61000-4-12 Input: 2 kV (Test Level 4 - symmetrical) 4 kV (Test Level 4 - asymmetrical) Comments: Criterion A Asymmetrical conducted disturbance variables Standards/regulations: EN 61000-4-16 Test level 1: 15 Hz 150 Hz (Test Level 4) Voltage: 30 V 3 V 3 V 3 V 30 V 30 V 30 V (10 s) 30 V (10 s) 300 V (3 s) Test level 2: 150 Hz 1.5 kHz (Test Level 4) Test level 3: 1.5 kHz 15 kHz (Test Level 4) Test level 4: 15 kHz 150 kHz (Test Level 4) Test level 5: 16.7 Hz 50 Hz 60 Hz (Test Level 4) Test level 6: 150 Hz 180 Hz (Test Level 4) Test level 7: 16.7 Hz 50 Hz 60 Hz (Test Level 4) Comments: Criterion A Attenuated oscillating wave Standards/regulations: EN 61000-4-18 Input, output (test level 1): 100 kHz 1 MHz (Test Level 3 - symmetrical) Voltage: 1 kV 2 kV 2.5 kV 1 kV 2.5 kV Input, output (test level 2): 10 MHz (Test Level 3 - asymmetrical) Input, output (test level 3): 100 kHz 1 MHz (Test Level 3 - asymmetrical) Signals (test level 1): 100 kHz 1 MHz (Test Level 3 - symmetrical) Signals (test level 2): 100 kHz 1 MHz (Test Level 3 - asymmetrical) Comments: Criterion A Attenuated oscillating magnetic field Standards/regulations: EN 61000-4-10 Test field strength: 100 A/m Test level 1: 100 kHz Test level 2: 1 MHz Comments: Criterion A Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. Criterion C: Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.