2904632 PHOENIX CONTACT -

PLC-OPT- 24DC/230AC/2.4/ACT - Solid-state relay module

PLC-INTERFACE for output functions, consisting of PLC-BPT.../ACT basic terminal block with push-in connection and integrated miniature solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 24 - 253 V AC/2.4 A

Cod. Articolo: 2904632 copia - copy

Cod. Fornitore: 2904632 copia - copy

PHOENIX CONTACT

Product properties	Product type: Solid-state relay module Product family: PLC-INTERFACE Application: Output function Operating mode: 100% operating factor Insulation characteristics Insulation: Basic insulation Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Basic insulation Overvoltage category: III Pollution degree: 2
Electrical properties	Maximum power dissipation for nominal condition: 0.19 W Test voltage (Input/output): 2.5 kV (50ÃHz, 1Ãmin., input/output) Air clearances and creepage distances between the power circuits Rated insulation voltage: 260 VÃAC Rated surge voltage: 4 kV
Input data	Rated actuating voltage U_C: 24 VÃDC Voltage range with reference to U_C: 0.8 ... 1.2 Rated actuating current I_C: 8 mA Input voltage range: 19.2 VÃDC ... 28.8 VÃDC "0" signal switching threshold in reference to U_C: < 0.4 "1" signal switching threshold in reference to U_C: > 0.8 Typical response time: 10 ms (at U_C) Typical turn-off time: 10 ms (at U_C) Status display: Yellow LED Protective circuit: Reverse polarity protection Surge protection Surge voltage protection: > 33 V Transmission frequency: 10 Hz
Output data	Designation: Output data Contact switching type: 1 N/O contact Design of digital output: electronic Contact connection type: Power contact Output voltage range: 24 VÃAC ... 253 VÃAC Limiting continuous current: 2.4 A (see to derating) Maximum inrush current: 250 A (20Ãms) Min. load current: 10 mA Leakage current: < 3 mA Max. load value: 340 A²s (tp = 10Ãms, at 25Ã°C) Surge voltage protection: > 275 V Voltage drop at max. limiting continuous current: < 1 V Output circuit: 2-conductor, zero voltage switch Protective circuit: RCV circuit
Connection data	Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² (Single ferrule) 2x 0.5 mm² ... 1 mm² (TWIN ferrule) Conductor cross section AWG: 26 ... 14
Dimensions	Width: 6.2 mm Height: 80 mm Depth: 86 mm
Material specifications	Flammability rating according to UL 94: V0 (Housing)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C
Approvals	Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group ENÃ60068-2-60
Standards and regulations	Air clearances and creepage distances between the power circuits Standards/regulations: IEC 60947-5-1
Mounting	Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any