1025401 PHOENIX CONTACT -

Dimensions	Width: 13.7 mm Height: 8.95 mm Length: 56.5 mm
Mounting	Mounting type: Insert in SFP slot
Interfaces	Ethernet FO Connection method: LC Transmission speed: 1 Gbps Transmit capacity, minimum: -9.5 dBm Transmit capacity, maximum: -3 dBm Minimum receiver sensitivity: -21 dBm Maximum receiver sensitivity: -3 dBm Transmission physics: Single-mode fiberglass Transmission length: 10 km (Fiberglass 9/125) Wavelength: 1310 nm Signal LEDs: depending on the Factoryline device No. of channels: 1 (LC single mode)
Product properties	Type: Factoryline devices with SFP slot Product type: SFP module Format: SFP (Small Form-factor Pluggable)
Signaling	Status display: via a Factoryline device
Electrical properties	Transmission medium: FO
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): 0°C ... 70°C (non-condensing) Ambient temperature (storage/transport): -40°C ... 85°C (non-condensing) Case temperature: max. 70°C (Operation) Permissible humidity (operation): 30 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 30 % ... 95 % (non-condensing) Vibration (operation): in acc. with IEC 60068-2-6: 5g, 150 Hz Air pressure (operation): 86 kPa ... 108 kPa (1500Ãm above sea level) Air pressure (storage/transport): 66 kPa ... 108 kPa (3500Ãm above sea level)
Standards and regulations	Standard designation: Laser equipment safety Standards/specifications: IEC 60825