Automazione Industriale

Meccatroinca

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 1196228
PHOENIX CONTACTNon disponibile

FL SWITCH 1708 - Industrial Ethernet Switch

Unmanaged Switch 1000, 8 M12 ports 10/100/1000 Mbps, degree of protection:IP65/IP66/IP67, Extended temperature range
Cod. Articolo: 1196228 copia - copy
Cod. Fornitore: 1196228 copia - copy
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Download
Caratteristiche Tecniche
DimensionsWidth: 60 mm
Height: 226 mm
Depth: 46 mm
Material specificationsHousing material: Zinc die-cast
MountingMounting type: Wall mounting
InterfacesEthernet
Connection method: M12 connectors, X-coded
Note on the connection method: Auto negotiation and autocrossing
Transmission speed: 10/100/1000 Mbps
Transmission physics: Copper
Transmission length: 100 m (per segment)
Signal LEDs: Data receive, link status
No. of channels: 8 (M12 ports)
Product propertiesType: Stand-Alone
Product type: Switch
Product family: Unmanaged Switch 1000
MTTF: 56.6 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
621 Years (SNÂ29500 standard, temperatureÂ25°C, operating cycleÂ21%)
460.2 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
Special properties: Extended temperature range
Switch functions
Basic functions: Store-and-forward switch, complies with IEEEÂ802.3
MAC address table: 4k
Status and diagnostic indicators: LEDs: US1, US2 (power supply), 2 LEDs per Ethernet port (Link/Activity and Speed)
Additional functions: 100 BASE-TX/100BASE-FX (IEEE 802.3u)
Jumbo frames (max. 9,600Âbytes)
Quality of Service (QoS) prioritization (IEEE 802.1p)
Energy-efficient Ethernet (IEEE 802.3az)
Gigabit Ethernet 1000BASE-T (IEEE 802.3ab)
10Base-T (IEEE 802.3)
Security functions
Basic functions: Store-and-forward switch, complies with IEEEÂ802.3
Electrical propertiesLocal diagnostics: US1/2 Supply voltage US1, US2 Green LED
LINK Link status Green LED
Transmission medium: Copper
Supply
Supply voltage (DC): 24 VÂDC (redundant)
Supply voltage range: 9 VÂDC ... 57 VÂDC
Residual ripple: 3.6 VPP (within the permitted voltage range)
Max. current consumption: 390 mA (9 V DC)
Typical current consumption: 142 mA
Connection dataConnection technology
Connection name: Power supply
Power supply
Connection method: M12 connector (A-coded)
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP65
IP66
IP67
Ambient temperature (operation): -40°C ... 75°C
Ambient temperature (storage/transport): -40°C ... 85°C
Permissible humidity (operation): 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing)
Shock (operation): 30g (ENÂ60068-2-27)
Vibration (operation): in acc. with IEC 60068-2-6: 5g, 150 Hz
Air pressure (operation): 79 kPa ... 108 kPa up to 2000Âm above mean sea level (Without derating)
Air pressure (storage/transport): 79 kPa ... 108 kPa up to 2000Âm above mean sea level (Without derating)
Standards and regulationsFree from substances that could impair the application of coating: Yes
EMC dataConformance with EMC directives: EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
EN 61000-6-2 EN 61000-4-5 (surge) Criterion B
EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
EN 61000-6-2 EN 61000-6-4 (interference) ClassÂA
EN 61000-6-2 EN 61000-6-4 (conducted interference) ClassÂA
Noise immunity: EN 61000-6-2
Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU
Noise emission: EN 61000-6-4
System propertiesFunctionality
Basic functions: Store-and-forward switch, complies with IEEEÂ802.3
SignalingStatus display: LEDs: US1, US2 (power supply), 2 LEDs per Ethernet port (Link/Activity and Speed)
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_01017.pdf

Approvals_01018.pdf

Approvals_01703.pdf

Manufacturer_declaration_01487.pdf

Manufacturer_declaration_03215.pdf

Manufacturer_declaration_05473.pdf

Package_slip_00172.pdf

Technical_drawing_10107.pdf

Various_00003.pdf