Catalogo Prodotti - BSA Swiss SA

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 57 A, number of connections: 2, connection method: Spring-cage connection, 1 level, Rated cross section: 10 mm², cross section: 0.2 mm²-16 mm², mounting type: NS 35/7,5, NS35/15, color: blue

Plug connectors and cables: Other connectors and cables

Sensor/actuator cable, 4-position halogen-free, free cable end, on Socket angled M8, coding: A, cable length: 5 m

Polarized retro-reflective photoelectric sensor

Cable duct for installation and mounting in control cabinets, blue, comprising upper part and mounting base, width: 25 mm, height: 80 mm, length: 2000 mm

End cover, width: 2.2 mm, height: 69.9 mm, color: gray

Distribution block, Block with vertical alignment and integrated supply, nom. voltage: 690 V, nominal current: 24 A, number of connections: 19, connection method: Push-in connection, Load contact, cross section: 0.14 mm²-4 mm², Push-in connection, Line contact, Rated cross section: 6 mm², cross section: 0.5 mm²-10 mm², mounting type: NS 35/7,5, NS35/15, color: blue

Device connector, rear mounting, 4-position, M12, Rear mounting, M16 x 1.5, Wave soldering, Alternative product in accordance with RoHS II without Exemption6c (Pb<0.1%) item no.: 1239746

Knife-disconnect terminal block, nom. voltage:400 V, nominal current:20 A, 1 level, connection method: Spring-cage connection, Rated cross section:2.5 mm², cross section:0.08 mm²-4 mm², mounting: NS 35/7,5, NS35/15, color:gray

Assembled Ethernet cable, shielded, 4-pair, AWG 26 stranded (7-wire), RAL 5021 (water blue), RJ45 plug/IP20 to RJ45 plug/IP20, line, length: 1 m

Ground terminal, When aligning with a feed-through terminal block with the same shape, an end cover must be interposed with insulation voltages of > 690 V, number of connections: 2, number of positions: 1, connection method: Screw connection, Rated cross section: 16 mm², cross section: 2.5 mm²-25 mm², mounting: PE foot with mounting screw, M4, mounting type: NS 35/7,5, NS35/15, NS32, color: green-yellow

Surge protective device, three-channel with remote indicator contact for 240/480V split-phase or 240/415V Wye three-phase AC, 4-wire.

Sensor/actuator cable, 3-position halogen-free, free cable end, on Valve connector A, with 1 LED, connected with Z diode, cable length: 5 m

Shield connection clamp, number of positions: 1, connection method: Spring-cage connection, mounting type: NS 35/7,5, NS35/15, color: black